Common Carpet Cleaning Mistakes

Carpet cleaning is done to remove dirt, stains, and fungi from carpets to create a clean and breathable environment. Many common methods of carpet cleaning include dry-cleaning, hot water extraction, steam cleaning, and vacuum shampooing. Vacuum cleaning can be done using a vacuum cleaner or a sweeper, both are available at home improvement stores and commercial carpet cleaners. Dry-cleaning involves spraying a solvent-based cleaning solution on the carpet and working it into the fibers. Hot water extraction uses heat and detergent to loosen dirt particles from the carpet and steam cleaning uses a carpet cleaner engine with special detergents that break down dirt particles deep within the carpet.

There are much DIY carpet cleaning mistakes that homeowners can make when cleaning their carpets, this article will highlight some of the most common. Get more info on Wentzville's trusted carpet cleaning. DIY carpet cleaning mistakes can cause damage not only to your carpets but to your home as well. Some common DIY carpet cleaning mistakes include over wetting the carpet, not using the right detergent, spraying the cleaner directly onto the carpet, or using the wrong water pressure and temperature. If you find yourself making one or more of these mistakes, stop right away and contact a local DIY carpet cleaning company near you. Here are some of the main reasons why people mess up their carpets and how to avoid making them.

Over Wetting the Carpet Many homeowners think that because they cleaned the carpet themselves that they won't have to worry about it getting soiled again. However, the grease and soil that had already built up in the carpet cleaning solution can still seep into the fibers. When you mix hot water extraction with shampoo, the dirt and grime stay attached to the carpeting. In order to avoid having dirt and stains show up again, it is best to only use a small amount of cleaner and water. You also want to work in very small sections. If you spread the cleaning solution all over the carpet, you will only be doing a big job for each area.
Using the Wrong Detergent This one is pretty self explanatory. Mixing detergent and water is the same as mixing sand and water. So many people try to clean their carpets with this type of mixture. The detergent is supposed to pull the dirt and grime from the carpet while the hot water extraction skims it away. When you apply the detergent directly to the carpet, you will only be removing the dirt that is lifted out of the solution through the steam.

Not Using the Right Deodorizers Some companies sell carpet cleaners that include an option for deodorizers. Click here now to get more info. While these cleaners are supposed to be used along with the other cleaners, many homeowners neglect to use them. Instead of investing in a quality deodorant, they will use the cheap, heavily soiled type that they have lying around at the store.

Using the Wrong Equipment While carpet cleaning equipment can make the process much easier, there are some things that you should never do with it. For instance, using a vacuum to extract soil from your carpet is never a good idea. It will tear up the carpet fibers and not allow a large enough amount of air to enter between the particles. In addition, a vacuum can cause some residue to be left behind which can attract dust and dirt particles. If you want to extract a small amount of dirty soil from your carpet, a wet bonnet will be your best bet.

All Posts

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly